Bauer Drilling Rig BG30 2020

1. Using a large triangular support, the support point is larger and stronger, with higher work efficiency, better verticality and longer service life.

2. The use of pin-shaft connection makes the largest component of the whole machine smaller and is suitable for transportation under existing transportation regulations.

3. Adopting energy-saving design, fuel consumption is 20~30% lower than that of the previous generation product.

4. Increase the safety design concept. When installing the whole machine, on-site personnel do not need to work at high altitudes and can complete it standing on the ground. The equipment assembly is faster and faster.

5. The use of Bao’e pull-out service work platform allows maintenance personnel to inspect and maintain the equipment in a safer environment. Innovative design and safety concepts won two awards from VDBUM and Euro Test in 2016

6. A drilling auxiliary system has been added, which can realize functions such as automatic pressurization, automatic soil unloading assistance in one and two directions, and casing pullout, reducing the operator’s workload and improving work efficiency.

7. The visualization system has been strengthened to make it easier for operators to understand the surrounding environment and reduce the safety risks of operating equipment and personnel in surrounding areas to a minimum.

8. Using 4 sections of machine-locked drill pipe, the maximum drilling depth can reach 70 meters, and the maximum drilling diameter can reach 2.5 meters.

9. The use of a single-layer winch system enhances the lifting capacity of the equipment during large-depth pile construction, saves the consumption of wire ropes, and reduces the cost of equipment use.

10. It has stronger ability to deal with complex formations, especially under the same conditions where the rock strength exceeds 80MPa, and the drilling efficiency is high.