Roller Bits with 14mm Carbide Cones Cover Drilling Pressure 200-350KN

Application: Suitable for 80-160Mpa hardness work of foundation piles.

 

Material: Tungsten carbide:SY11 + 15MnNi4Mo.

 

Size: 5 1/2’’, 5 7/8’’, 6 1/2’’, 8 1/2’’, 12 1/4’’, 12 1/2’’, 17 1/2’’.

 

Type: Weld-in roller bits, Roller bits with holder, Bolt-on roller bits

 

You May Also Like...

Bullet Teeth For Rock Drilling

Introduction
  • All cover with 14mm carbide cones.
  • Common holder locking by pins.
  • Rubber sealing O ring, Sliding bearing, with bearing lubricating oil tank.
  • Drilling pressure:200-350KN.
Parameters
Part No. Description Standard Pin Size (API REG)
5 1/2’’,5 7/8’’, 6 1/2’’ Roller bit 3 1/2’’
8 1/2’’ Roller bit 4 1/2’’
12 1/4’’, 12 1/2’’ Roller bit 6 5/8’’
17 1/2’’ Roller bit 7 5/8’’
Advantages
  1. 55pcs Conical-ball carbide bits.
  2. Diameter of carbide bit:14mm.
  3. Full cover with carbide cones.
  4. High working efficiency.
  5. Bearing encapsulation hole is bolted encapsulation,even if the solder joint is worn off, the cir clip spring in the bearing will not be broken and will not affect the bearing, can continue to use after spot welding.
  6. The problem of oil leakage from oil sac end hole was solved.
Details
Packing and Delivery

Download

Drill Bits Catalogue
(PDF,8 MB)
Cases
Inquiry

Contact Us